Sizes Available
5 Gallon Pail
55 gallon Drum
Colors Available
-
White
-
Yellow
-
Blue
-
Red
* Colors may vary slightly from actual product.
High Performance Traffic Marking Paint
- Cold spray-applied thermoplastic featuring hot-applied thermoplastic performance.
- Liquid Thermoplastic Traffic Marking Paint can be applied with standard airless spray equipment.
Coverage
155-180 ft. of 4-inch line per gallon at 30-35 Mils wet film thickness.
MSDS Sheets |
Specification Sheets |
Description
SealMaster® Liquid Thermoplastic Traffic Marking Paint is a high-performance, highly durable Waterborne traffic marking material. Unique patented cross linking technology provides durability normally associated with Hot-melt Thermoplastics and epoxies. SealMaster® Liquid Thermoplastics meets and exceeds the performance requirements of Federal Specification TTP-1952E, Type III. SealMaster® Liquid Thermoplastic can be applied with conventional spray equipment (with stainless steel components) to asphalt, concrete, or existing road markings that are adhering well to the pavement surface.
Mixing Procedures
Stir well before using. Do not dilute.
Application
For maximum durability apply at a wet film thickness of 30-35 mils (155-180 ft. of 4-inch line per gallon). When applying at 30-35 wet mills, it is recommended that a larger particle size glass bead be used for optimum retroflectance and wet night visibility. A bead drop rate of approximately 7 lbs./gal. of paint for a 4-inch line and 30-35 mil thickness is a suitable range which can be fine tuned for optimum performance. The dry-to-no-pickup time for a 30-35 mil thickness application is typically 5 minutes or less depending on conditions. Liquid Thermoplastic can be applied with standard airless spray equipment with stainless steel components.
Important
Apply to clean dry surface when surface and air temperature is not expected to drop below 50°F or exceed 120°F in a 24 hour period.
Clean Up
Wash tools in water before material dries