SS-1H Asphalt Binder

Downloads

Sizes Available

5-gallon pail
55-gallon drum
275-gallon tote
bulk

SS-1h Asphalt Binder is an anionic asphalt emulsion designed for use as a tack coat for patching, paving, and coating processes. SS-1h Asphalt Binder promotes adhesion of bituminous concrete products and coatings. Meets AASHTO M140, ASTM D977, and the ISSA requirements for SS1h when tested in accordance with ASTM D140, ASTM D244, and ASHTO T59.

USES

  • Tack Coat
  • Fog Seal
  • Prime Coat
  • Slurry Seal
  • Dust Control
  • Base Stabilization

COVERAGE

Dependant upon water dilution.

APPLICATION

Apply properly mixed SS-1h Asphalt Binder (SS-1h and water) with spray equipment, brush, or squeegee. Stir material thoroughly before applying.

MIXING PROCEDURES

  • For Use as a Tack Coat or Fog Seal: Apply properly diluted SS-1h Asphalt Binder (1 part SS-1h Asphalt Binder, 1 part water) at a rate of .07 – .10 gallon of mix per square yard (90-130 square feet per gallon of mix).
  • For Use as a Primer for Coatings: Apply properly diluted SS-1h Asphalt Binder (1 part SS-1h Asphalt Binder, 8 parts water) at a rate of .07 – .10 gallon per square yard (90-130 square feet per gallon).

Circulation of product is recommended after an extended period of storage.  Avoid repeated pumping.

IMPORTANT

Apply coatings, patching materials, or paving materials as soon as possible after SS-1h Asphalt Binder dries (within 24 hours) in order to maintain tackifying properties.

CLEAN UP

Wash tools in water before material dries. After material has dried, clean up with TarBuster or other asphalt remover.

Go back to Products