CSS-1H

CSS-1h is a cationic slow set asphalt emulsion designed for use as a tack coat, prime coat, fog seal, or slurry seal.  CSS-1h promotes adhesion of bituminous concrete products and coatings.  Meets AASHTO M208, ASTM D2397, and the ISSA requirements for CSS1h when tested in accordance with ASTM D140, ASTM D244, and ASHTO T59.

USES

  • Tack Coat
  • Fog Seal
  • Prime Coat
  • Slurry Seal
  • Dust Control
  • Base Stabilization

COVERAGE

Dependant upon water dilution.

APPLICATION

Apply properly mixed CSS-1h (CSS-1h and water) with spray equipment, brush, or squeegee. Stir material thoroughly before applying.

MIXING PROCEDURES

  • For Use as a Tack Coat or Fog Seal: Apply properly diluted CSS-1h (1 part CSS-1h, 1 part water) at a rate of .07 – .10 gallon of mix per square yard (90-130 square feet per gallon of mix).
  • For Use as a Prime for Coatings: Apply properly diluted CSS-1h (1 part CSS-1h, 8 parts water) at a rate of .07 – .10 gallon per square yard (90-130 square feet per gallon).

Circulation of product is recommended after an extended period of storage.  Avoid repeated pumping.

IMPORTANT

Apply coatings, patching materials, or paving materials as soon as possible after CSS-1h dries (within 24 hours) in order to maintain tackifying properties.

CLEAN UP

Wash tools in water before material dries. After material has dried, clean up with TarBuster or other asphalt remover.

Downloads

Sizes Available

Bulk (minimum order required; call for details)

Go back to Products