AQUASET is a cold-mix pothole patch that is a permanent repair solution for asphalt and concrete applications. AQUASET is water-activated and uses a proprietary blend of organic additives that are environmentally friendly, safe, and non-toxic. AQUASET is free of solvents and VOC’s. AQUASET is traffic-ready immediately after compaction. AQUASET produces no hydrocarbon leaching or evaporation into the soil or atmosphere, and can be used in all types of weather-cold or warm, wet or dry. AQUASET can be sealcoated after a one hour cure.
Premium, High Performance, Water-Activated Patching Material
• Easy to apply
• Sets up within minutes
• Highly durable
• All weather formula (wet or dry, hot or cold)
One 55 lb. Pail of AquaSet cold patch will cover approximately 5 square feet at 1” depth.
AQUASET is ideal for making rapid permanent repairs on roads, highways, parking lots, bridge decks, driveways, utility cuts and manhole repairs, tennis courts, walkways, and pathways. AQUASET repairs potholes in both asphalt and concrete pavements.
Remove all loose material and standing water from area to be repaired. In freezing conditions, all ice must be removed from the area to be patched.
Fill pothole with AQUASET to a level approximately ½ inch above surface to allow for compaction. Spread evenly with rake or trowel. Prior to compacting, generously sprinkle AQUASET with water so that the water enters the structure and wets the material completely prior to compaction. Compact to a smooth finish with a hand-tamper, vibratory plate or roller. If the compacted material is below the level of the surrounding area, spread more AQUASET, pour more water and re-compact. NOTE- If the depth of the pothole is greater than 3”, it is advisable to fill the pothole in two layers as outlined above.
Use automotive hand cleaners on hands and arms, or vegetable oil based spreads may be used to gently remove material from facial areas.
55 lb. Pail - 6mm Rock Size
* Colors may vary slightly from actual product.