Aquaphalt® is a revolutionary, high performance, flexible, reactive repair product for use in repairing asphalt and concrete road surfaces. Aquaphalt® reacts with water to provide a permanent repair solution. All sizes of Aquaphalt® are free of solvents or volatile organic compounds (VOC’s). Aquaphalt® comes in three (3) sizes (4.0mm, 6.0mm, & 9.0mm) for surface, intermediate or base repairs for any type of asphalt or concrete road repair.
Coverage
One 50 lb. pail of Aquaphalt® cold patch will cover approximately 5 square feet at 1” depth.
Uses
Highways (asphalt or concrete), Runways/Taxiways/Aprons, Bridge Decks, Manhole repairs, Potholes, Utility Cuts, Parking Lots, Driveways, Tennis Courts, Pathways
Surface Preparation & Application Procedure
Remove all loose material from area to be repaired. Place Aquaphalt ®in the patch and level with a rake or trowel. Allow 0.5” -1.0” additional height for compaction. Saturate with water (use approx. 1/2 gallon of water to 50 lbs. Aquaphalt ®) and compact. If the depth of the pothole is greater than 2-3”, it is advisable to fill the hole in two layers. In colder weather a freezing point suppression additive may be added to the water prior to saturation (i.e. road brine, salt water, etc.)
Clean Up
Use Automotive hand cleaners on hands and tools. Tools may also be cleaned with light oil,
mineral spirits or vegetable oil.