Holiday Hours

We will be closed on Friday, Dec. 21st at 11:30 am and will resume normal business hours on Wednesday, Jan. 2nd, 2019.

Happy Holidays!


Sizes Available

5 gallon pail (4 gallon net)

Colors Available

ColorPave™ Neutral Ready-Mix is designed to be mixed with ColorPave™ HD Tint or ColorPlus™.

ColorPave™ HD Tint Colors Available:

  • Forest Green
  • Light Green
  • Terra Cotta
  • Sahara Beige
  • Brownstone
  • Red
  • Brickyard Red
  • Olivestone
  • Graystone
  • Burnt Sienna
  • Slate Gray
  • Dove Gray
  • Sandstone

* Colors may vary slightly from actual product.

ColorPlus™ Colors Available:

  • Forest Green
  • Light Green
  • Dark Green
  • Beige
  • Brown
  • Red
  • Maroon
  • Tournament Purple
  • Gray
  • Blue
  • Light Blue
  • Dove Gray
  • Ice Blue
  • Sandstone
  • Yellow
  • Orange

* Colors may vary slightly from actual product.

ColorPave Neutral Ready-Mix: Asphalt Driveway Paint | Basketball Court Paint | Blacktop Paint | Asphalt Color

ColorPave™ Neutral Ready-Mix

ColorPave™ beautifies and protects asphalt pavement surfaces including driveways, parking lots, walkways, golf cart paths, bike/jogging trails, amusement parks, basketball courts, and more. The durable, textured coating provides an ideal surface for driveways that double as a basketball court, or any multipurpose areas where asphalt color is desired.

The acrylic-based formula of ColorPave can be used as an asphalt driveway paint, but not on areas that have been sealcoated with a coal tar or asphalt based coating. ColorPave Ready-Mix comes pre-mixed with silica sand to fill voids in asphalt and provide a safe, non-skid area where blacktop paint or asphalt color is needed.


Apply ColorPave™ at a rate of .13 to .15 gallon per square yard (60-70 square feet per gallon) per coat. Two coats are recommended for optimum performance. One pail will cover approximately 240-280 square feet per coat.

ColorPave 2


ColorPave™ Neutral Ready-Mix is a 100% acrylic water based emulsion designed as a pavement color coating. ColorPave™ is fortified with sand for slip resistance. ColorPave™ is supplied in a neutral color designed to be mixed with ColorPave™ Tint (Pigment Dispersion) to achieve desired color. ColorPave™ Tint is supplied separately and is available in several color choices.

Surface Preparation

Surface must be clean from all oils, grease, loose material, dirt, and dust. Pavement surface repairs should be made with a suitable hot or cold asphalt mix. Cracks should be filled with SealMaster® or SportMaster® acrylic base crack filling products. DO NOT USE HOT APPLIED CRACK FILLING MATERIALS.

Mixing Procedures

Add one pint of ColorPave™ Tint to one 5-gallon pail (approx. 4-gallons) of ColorPave™ Neutral Ready-Mix. Mix thoroughly until Tint is completely dispersed into the Neutral Base. If needed, a small amount of water may be added to facilitate application.


ColorPave® shall be applied by squeegee, brush, roller, or specialized textured spray equipment.


Be sure to use OSHA approved respirator when applying this product. Temperatures must be above 50°F both during application and for aperiod of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up

Wash tools in water before material dries.

Go back to Products