The Environmentally Friendly, Non-Toxic Synthetic Polymer Emulsion
Coverage
SealMaster® Dust Suppressant and Soil Stabilizer is a synthetic polymer emulsion concentrate consisting of a compbination of carefully selected polymers designed specifically for dust palliative and soil stabilization applications. Provides superior bonding and stabilizing for lasting performance.
Description
SealMaster® Dust Suppressant and Soil Stabilizer is a synthetic polymer emulsion concentrate consisting of a combination of carefully selected polymers designed specifically for dust palliative and soil stabilization applications. It is safe, non-toxic and environmentally friendly. Provides superior bonding and stabilizing for lasting performance.
Uses
- Dust control and palliative for both traffic
- Sub-base stabilizer – mixed up to 6-inches deep and non-traffic applications
- Hydroseed and Mulch Tackifier
- Slope Erosion Control
- Stock Pile Sealant and Dust Cap
- Unpaved Road Stabilizer
- ADA Trails and Cart Paths
- Walking Path & Trail Stabilizer
- Agricultural Roads
- Helicopter & Aircraft Runway Stabilizer
- Military Operations
- Quarries and Gravel Roads
- Construction Sites
- Heavy Haul Roads
- Gravel Parking Lot Stabilizer
Application
Topical Application:
For best results apply evenly with pressurized spray equipment, distributor trucks, spray trailers, or hand sprayers. Allow 24 hours for material to set before resuming traffic.
Full Depth Application:
Scarify, till or loosen dirt or gravel surface to a depth of 3 to 4 inches. Apply material with pressurized spray equipment. Two applications my be required to achieve recommended coverage rate. A grader may be used to level material prior to compacting with a roller. Once material has been rolled, a light application of material should be sprayed over the surface as a final lock down coat.
Important
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.
Clean Up
Wash tools in water before material dries.